DoozaDooza
Menu
Log inText Dooza Crew
Construction Takeoff

Commercial Masonry Takeoff Checklist for Subs (2026)

A 4-step commercial masonry takeoff checklist covering structural S-sheet cross-checks, CMU runs and bond beams, brick/veneer and flashing, and rebar/grout cell spacing.

5 min read
November 19, 2026
Commercial masonry estimator highlighting architectural elevation and CMU wall floor plans beside a spreadsheet laptop

Short Answer

A complete commercial masonry takeoff checks four layers before you price a bid: (1) architectural and structural plans, wall-type schedules, wall heights (to bearing vs. roof deck), and scale verification, (2) CMU block counts by size (8″, 10″, 12″), fire-rated or acoustic blocks, bond beams, and control joints, (3) brick, cast stone, or veneer square footage plus mortar, ties, flashing, and weep holes, and (4) vertical/horizontal rebar, grout fill spacing, lintels/embeds, and deducted vs. non-deducted door/window openings.

Rather not spend evenings scaling elevation and structural sheets? Upload your plan on Dooza Takeoff and get our 4-tab Excel workbook (Quantities, Areas, Assumptions, Open Questions — or mapped into your own .xlsx bid template on request) plus a color-coded marked-up plan PDF in 48 hours while keeping your own material and labor pricing in-house. Your first plan is free ($0, no card), then $100/plan or $399/month for up to 10 plans (month-to-month, no annual contract). Inspect our worked sample Excel + markup PDF on /takeoff/example or check /takeoff/cost.

4-Step Commercial Masonry Takeoff Checklist

  1. Verify scale, wall schedules, and structural notes: Cross-check architectural floor plans against structural S-sheets for CMU wall thickness, top-of-wall elevation, and seismic/wind reinforcement notes.
  2. Measure CMU runs, bond beams, and control joints: Break out standard, fire-rated, and split-face CMU by height and thickness, and log bond-beam linear feet and control-joint spacing separately.
  3. Quantify brick/veneer, flashing, and accessories: Measure exterior veneer elevations net of large openings, and list mortar bags, wall ties, thru-wall flashing, and weep vents per spec.
  4. Log rebar, grout cells, lintels, and addenda: Separate grouted-cell spacing (e.g., 16″, 24″, or 48″ o.c.), vertical bar sizes, loose steel/precast lintels, and any addenda changes before pricing labor.

Manual Scaling vs. Dooza Takeoff (/takeoff)

Step Manual scaling in-house Dooza Takeoff (/takeoff)
Quantity & elevation measurement Evenings spent measuring CMU runs, openings, and elevations 48-hour turnaround with color-coded marked-up plan PDF
Output format Custom spreadsheet built per bid 4-tab Excel (Quantities, Areas, Assumptions, Open Questions) or mapped into your own .xlsx template
Pricing control In-house You keep all material, crew-rate, and markup pricing in-house
Cost Estimator hours First plan free ($0, no card); then $100/plan or $399/month for up to 10 plans

Deliverables & Pricing (/takeoff/example, /takeoff/cost)

  • 4-tab Excel + Marked-up Plan PDF: Every wall run, opening deduction, and assumption is documented in Assumptions and Open Questions and color-coded on the plan PDF.
  • Inspect a real worked sample first: See our downloadable sample Excel + marked-up PDF on /takeoff/example.
  • Flat, no-contract pricing: First plan $0 (no card), then $100/plan or $399/month for up to 10 plans (/takeoff/cost).

Frequently Asked Questions

What should be on a commercial masonry takeoff checklist?

Check four layers before pricing: (1) scale and structural/architectural wall schedules, (2) CMU block sizes, heights, bond beams, and control joints, (3) brick or stone veneer square footage plus mortar, ties, and flashing, and (4) rebar sizes, grout cell spacing, lintels, and opening deductions.

What deliverables do I get from Dooza Takeoff?

Within 48 hours you receive our default 4-tab Excel workbook (Quantities, Areas, Assumptions, Open Questions) plus a color-coded marked-up plan PDF so you can trace every wall run back to the drawing. On request, we can also map quantities into your existing .xlsx bid template.

Can I inspect a real takeoff sample before uploading plans?

Yes. View our worked sample Excel and marked-up plan PDF on /takeoff/example before uploading your own set.

How much does Dooza Takeoff cost for masonry subcontractors?

Your first plan is free ($0, no card required). After that, pricing is flat: $100/plan or $399/month for up to 10 plans, month-to-month with no annual contract. See /takeoff/cost for full details.

Try Dooza Crew

A lead AI agent plus helper agents that browse the web, write files and ask you before they send or pay. Free: install the app and start.

Related Articles

Commercial Roofing Takeoff Checklist for Subcontractors (2026)
Construction Takeoff

Commercial Roofing Takeoff Checklist for Subcontractors (2026)

A 4-step commercial roofing takeoff checklist covering roof scale and slopes, membrane and insulation areas, linear flashing and penetrations, and spec/addenda checks.

5 min read
Read
Commercial Drywall Takeoff Checklist for Subcontractors (2026)
Construction Takeoff

Commercial Drywall Takeoff Checklist for Subcontractors (2026)

A 4-step commercial drywall takeoff checklist covering partition types and wall heights, board layers and metal studs, ceilings/soffits/shaft walls, and finish/addenda checks.

5 min read
Read

Got busywork? Dooza it.

Still doing it? The world is Doozaing.

Try Dooza Crew, AI agents that do your busywork: free to use. Want a custom agent built for you instead? A Dooza engineer scopes it on a free 30-minute call and it starts as a refundable pilot. See pricing.

Crew: free to use · Custom agents: refundable pilot, 100% refund within 14 days

Talk to Dooza now

Dooza builds AI products and services for small businesses. Custom Dooza agents start with a refundable pilot: 100% refund within 14 days.

Or text +1 (855) 594-6841 to use Dooza Crew directly (no sign-up needed), or get the app. Want it done for you instead? Dooza Managed, $200/month.